Spin Selection Button - Baumatic BFWE1420W User Manual

To cancel the delay start feature, you should press and hold
down the Start/Stop button until the LCD display changes back
to the screen that you see when originally selecting a wash
program. You can then select another wash cycle that will start
immediately or you can set up the delay start feature to operate
again.
o After a delay start has been cancelled, the door lock light will
remain off for one minute; this indicates that the door is still
locked.
When the LOCK DOOR light switches on, it will then be possibly
for you to open the porthole door.

Spin selection button

Your washing machine will automatically select an appropriate spin
speed for each wash program. However it is possible to alter the
spin speed that it automatically selects, by pressing the spin
selection button.
Turn the wash program selection knob to the wash program
that you want to use.
Press the spin reduction button and continue to press it until
the LCD display shows the spin speed that you require.
o On wash programs where 1000 rpm is automatically selected,
the speed in the LCD display will change as follows;
1000-900-800-700-600-500-400-100-
1400-1300-1200-1100
o On wash programs where 600 rpm is automatically selected,
the speed in the LCD display will change as follows;
600-500-400-100-
If you continue to press the spin reduction button after
100rpm appears. Then
This symbol means that the appliance will not spin and it will
move to the drain program after the rinses have completed.
If you press the spin reduction button again, then
appear in the LCD display. This means that the clothes will be
held in water, until you select a spin or drain program.
YOU MUST DO THIS BEFORE OPENING THE DOOR OF
THE APPLIANCE.
- .
will appear in the display.
- .-
will
22