Table of Contents
Advertisement
Wash program guidance
The washing machine automatically selec
o
particular wash program. However it is possible to reduce the spin
speed by using the spin reduction feature.
o Important: You should make sure that the selected spin speed is
appropriate for the garments that you are washing.
If you use the spin reduction fea
o
not go into a spin cycle. If you pick this option, then the machine
will stop with water in the drum.
o Important: Before opening the door of the appliance, you MUST
select the drain program to clear this water.
o The LCD display shows an approximate time remaining for the
selected wash cycle. Please note that factors external to the
machine, e
.g. the temperature of your water supply, your water
pressure etc. can affect the time it takes for the wash cycle to
complete.
Selecting a wash program
o Load
your
compartment of the soap drawe
o Close the porthole door firmly.
o Select the most appropriate wash program for the garments that
you are washing, by turning the program selection knob (K).
o Select any program options by using the pre-wash button (E),
extra rinse button (F) or anti-crease button (G).
o Any program option that you select, will affect the length of time
that the wash cycle will take to complete.
Alter the spin speed, if require
o
knob (H) or change the wash tempe
temperature control knob (I).
o Press the Start / Pause button (C).
o After approximately 5 seconds, you will hear your washing
machine start the wash cycle.
ture, you can make the machine
laundry
and
put
r.
ts a spin speed for a
detergent
in
d, using the spin speed control
rature by using the wash
the
relevan
t
19
Advertisement
Table of Contents
