Reset Water Distance - Lowrance HDS-5x Operation Manual

Settings
To select a Temperature Averaging interval:
1. Highlight the
2. Press the keypad left/right to select the desired interval and press
enTeR.

Reset Water Distance

If you connect a paddlewheel speed sensor to your unit, you can track the distance
you travel on the water. Reset Water Distance, resets water distance to zero.
To reset water distance, highlight Reset Water Distance and press enTeR.
Transducer Type
Selects the transducer model connected to your display unit. In some transducers
with built-in temperature sensors, the temperature may not be accurate if the correct
transducer is not selected from the Transducer Type menu.
To select a Transducer Type:
1. Highlight
Installation menu and press enTeR.
The Select Transducer menu will
appear.
2. Use the keypad to your transducer
type and press enTeR.
3. Highlight
Temperature Averaging box on the Installation menu.
Transducer Type box on the
OK and press enTeR.
Transducer type menu
58