Lowrance HDS-5x Operation Manual page 19

Pages
Data menu
Controls Info page data, page layout and data display format
selection. To access the Data menu, press MenU while on the
Info page.
Dash 1, Dash 2 and Dash 3
Data menu
Info Page dashboard templates that vary in page layout and in the
number of gauges supported. The templates save you time by allowing you to use the
Info page without having to manually set up a gauge layout.
Gauge Layout Templates
General Engine
Digital Layout Bar Layout
Layout
You can change the gauge layout of Dash 1 (General Engine Layout), Dash 2 (Digital
Layout) and Dash 3 (Bar Layout) templates using the change layout command. To
select a dashboard template, highlight the desired template on the Data menu and
press enTeR.
NOTE: You can toggle through the dashboard templates on the
screen by pressing the keypad left/right.
Edit
Used to select information displayed on the Info page. To switch the screen to Edit
Mode, select Edit from the Data menu and press enTeR. The active gauge will be
shaded in blue (analog) or surrounded by a blue border (digital and bar).
18