Turn Off Hyperscroll; Reset Options; Reset Water Distance - Lowrance X100C Installation And Operation Instructions Manual

To turn off HyperScroll:
1. From the Sonar Page, press |↓ to | .
MENU P S ENT
ING PEED
2. The Ping Speed Control Bar appears. Press↓ to decrease ping speed
to 50 percent. When it's set at the desired level, press .
EXIT
When you boost ping speed and switch into HyperScroll, the width of
the FasTrack bar graph display doubles in width at the right side of the
screen. This allows you to better see the virtually instantaneous sonar
returns, just as you would on a flasher sonar unit. For more informa-
tion on FasTrack, see its entry in this section.

Reset Options

This command is used to reset all features, options and settings to their
original factory defaults. This is useful when you have changed several
settings and want to return the unit to basic automatic operation.
1. Press | |↓ to | .
MENU MENU R O ENT
ESET PTIONS
2. Press ← to
| .
Y ENT
ES
3. All the menus are cleared and the unit reverts to the full sonar chart,
just as if you had turned it on for the first time. All options have been
returned to the factory settings.
At left, Main Menu with Reset Options command selected. At right, the
Reset Options dialog box, with "Yes" selected.

Reset Water Distance

The sonar chart's Digital Data display option includes a box that shows
distance traveled, called Water Distance. This information is calculated
60