Time Period
Controls how much time will pass before a point is placed along the trail.
To set Time Period:
1.
Highlight
enTeR. The distance period keypad
will appear.
2.
Input the desired distance and select
OK. Press enTeR.
Units
Controls the unit of measure used for a variety of
data, ranging from distance and speed to heading and
barometric pressure. To access the Units menu, select
Units from the Settings menu and press enTeR.
To change a unit of measure:
1.
Select a unit from the Units menu. Press
enTeR.
2.
Select the a unit of measure and press
enTeR.
Time Period and press
Time Period set to 5 seconds
73
Settings