Lowrance HDS-5x Operation Manual page 68

To set tank to full:
1. Highlight the
on the Refuel screen and press
enTeR.
2. Highlight
The calibration options screen will
appear. You are
ready to calibrate.
To calibrate engine(s):
1. With the calibration options screen displayed, select the checkbox
next to the engine you would like to calibrate .
2. Highlight
appear.
Calibration options screen
3. Use the keypad to highlight the Actual amount used window and
press enTeR.
4. Input the amount of fuel used in the Actual amount used dialog box
and press enTeR.
5. Highlight the
screen will appear.
6. After confirming calibration data, highlight
Set to full checkbox
OK and press enTeR.
Tank set to full
OK and press enTeR. The Calibration screen will
Next button and press enTeR. The Confirm calibration
Calibration screen
OK and press enTeR.
67
Settings