Lowrance HDS-5x Operation Manual page 21

Pages
To select data:
1. Highlight
The Select Data menu will appear.
2. Use the keypad to select the desired category
and press enTeR. A list of subcategories will
appear.
3. Select the desired subcategory and press
ENTER.
To add source:
Add Source from the Edit Data menu
1. Select
and press enTeR.
2. Use the keypad to select the desired category
and press enTeR. A list of subcategories will
appear.
3. Select the desired subcategory and press
enTeR.
To remove a source:
1. Highlight
The Remove data-source window will appear.
2. Select the source you want to remove and press
To Configure Limits:
1. Highlight
and press enTeR. The Configure Limits menu
will appear.
2. Select the desired text box and press
3. Use the keypad to enter the desired limit or
warning threshold.
OK and press enTeR.
4. Select
NOTE: The Limits portion of the Configure Limits menu will
only be shown when configuring analog gauge limits.
Select Data from the Edit Data menu and press enTeR.
Remove Source from the Edit Data menu and press enTeR.
Configure Limits on the Edit Data menu
enTeR.
20
enTeR.