Reset Water Distance; Sensitivity & Auto Sensitivity - Lowrance X52 Installation And Operation Instructions Manual

3. All the menus are cleared and all options are returned to the factory
settings.
Main Menu with Reset Options command selected.

Reset Water Distance

The sonar chart's Digital Data display option includes a window that
shows distance traveled, called Water Distance ("W Distance"). This
information is calculated from an optional water speed sensor. The
Water Distance window can be reset to zero using the Reset Water
Distance command.
Press | |↓ to | . The menus are
MENU MENU R W D ENT
ESET ATER ISTANCE
cleared and the water distance is reset to 0.00.
Screen Contrast and Backlight Level
See the separate entries in this section for Contrast and Backlight Level.
Sensitivity & Auto Sensitivity
The sensitivity controls the ability of the unit to pick up echoes.
Sensitivity can be adjusted, because water conditions vary greatly. A
low sensitivity level (from zero to 50 percent) excludes much of the
bottom information, fish signals, and other target information.
High sensitivity levels let you see this detail, but it can also clutter the
screen with many undesired signals. Typically, the best sensitivity level
shows a good solid bottom signal with Grayline and some surface clutter.
59