Lowrance HDS-5x Operation Manual page 63

Settings
To set T/M or R:
1. Press MenU twice.
2. Select Radar and press enTeR.
3. Highlight
4. Use the arrows to select a bearing and press
Installation
Provides access to the Radar Installation menu.
To access Radar Installation menu:
1. Press the MenU key twice.
Highlight Radar and press ENTER.
2.
Select Installation and press enTeR.
3.
Installation Adjustment Menu
The installation adjustment menu is used to make adjustments to bearing alignment,
range offset, antenna height and open array park angle.
When the installation adjustment menu is accessed, press the
keypad up/down to select a feature. Press the keypad left/right
to make adjustments to a selected feature.
Press exIT to return to the Radar Installation menu. To remove
the Radar Installation menu from the screen, select Close and
press enTeR.
Bearings and press enTeR.
Radar Installation menu
62
enTeR.
Adjustment Menu