Setting The Dispense Position - Avery Dennison Monarch 9855 Operator's Handbook, Maintenance, Service & Parts Manual

Setting the Dispense Position

This function adjusts the stopping point of the label.
To change the setting, from the Main Menu, select Setup, Supply, then
Positioning. Follow these steps.
Press  or  until you see
1.
POSITIONING
Dispense Pos
Press Enter/Pause.
2.
DISPENSE POS
[50/200]: +65
Press  or  to change the dispense position. Pressing  decreases
3.
the value;  increases it.
Press Enter/Pause when the number you need appears. Press
4.
Escape/Clear until you see the Main menu.

Setting Supply Options 4-13