To change the setting, from the Main Menu, select Setup, then Defaults.
Then, follow these steps.
Press or until you see
1.
DEFAULTS
Adjust Length
Press Enter/Pause. You see
2.
ADJUST LENGTH
[-30/30]:
Press or to adjust the image's length. Pressing decreases the
3.
setting, which reduces the image length by the entered percentage.
Pressing increases the setting, which increases the image length by
the entered percentage.
Note:
Press the left function button to change the amount (by 1 or 10).
Press Enter/Pause when the number you need appears. Press
4.
Escape/Clear until you see the Main menu.
+0
Setting Defaults 6-13