Avery Dennison Monarch 9855 Operator's Handbook, Maintenance, Service & Parts Manual page 53

Normal (default)
Overstrike/Continue 1x
Overstrike/Continue 2x
Overstrike/Continue 3x
Overstrike/Continue 4x
Overstrike/Continue 5x
To change the setting, from the Main Menu, select Setup, then Supply. Then
follow these steps.
1. Press  or  until you see
SUPPLY

Error Action
2. Press Enter/Pause. The current setting is displayed, for example:
ERROR ACTION
 Ostrk/Cont 1x
3. Press  or  to see the other options. After you display the option you
want, press Enter/Pause.
4. Press Escape/Clear until you see the Main Menu.
Note: Depending on the selected error action, you may or may not see a
label with the overstrike pattern.
The printer errors and the condition causing
the error is displayed. The error must be
cleared before operation can continue. An
operator must press Escape/Clear to clear the
error and continue printing. No overstrike
pattern is printed.
The printer prints an overstrike pattern on one,
two, three, four, or five consecutive labels and
stops printing after the selected number of
overstrike patterns have been printed. An
operator must press Escape/Clear to clear the
error and continue printing. Do not use the
label with the overstrike pattern.
Note: The printer re-calibrates (feeds a blank
label) after a motion or verifier error.

Setting Supply Options 4-19