Setting The Number Of Decimal Places; Setting The Slashed Zero Appearance - Avery Dennison Monarch 9855 Operator's Handbook, Maintenance, Service & Parts Manual

S e t t i n g t h e N u m b e r o f D e c i m a l P l a c e s
You can set the printer for 0, 1, 2, or 3 places after the decimal in a price
field. In U.S. currency, you might print prices like this: $24.00 (2 decimal
places) or like this: $24 (0 decimal places).
Press  or  until you see
1.
DEFAULTS
 Decimal Places
Press Enter/Pause. The current setting is displayed, for example:
2.
DECIMAL PLACES
 2
Press  or  until you see the option you want. Then press
3.
Enter/Pause. Press Escape/Clear until you see the Main menu.
S e t t i n g t h e S l a s h e d Z e r o A p p e a r a n c e
The slashed zero feature lets you select how you want the zero character
printed; either without a slash, 0 or, with a slash, Ø.
Standard or reduced fonts print the slashed zero character (Ø). Bold and
OCR fonts print the standard zero (0) only. The slashed zero selection does
not take effect until the format is sent to the printer again. If you change the
way zero is printed, you must resend your formats.
To change the setting, from the Main Menu, select Setup, then Defaults.
Then, follow these steps.
Press  or  until you see
1.
DEFAULTS
 Slashed Zero
Press Enter/Pause. The current setting is displayed, for example:
2.
SLASHED ZERO
No




Setting Defaults 6-5