Using Password Protection; Enabling The Password (System Administrators Only) - Avery Dennison Monarch 9855 Operator's Handbook, Maintenance, Service & Parts Manual

U s i n g P a s s w o r d P r o t e c t i o n
The password protection feature prevents formats, graphics or fonts from
accidentally being deleted from the printer's memory. It also limits access to
the Setup and Scripts menus.
Enabling the Passw ord (System Administrators onl y)
A System Administrator can enable the password that must be entered
before formats, graphics or fonts can be deleted.
From the Main Menu, press  or  until you see
1.
MAIN MENU
 Diagnostics
Press Enter/Pause. You will see
2.
Enter Password
_ _ _ _ _ _
Enter the password: press Feed/Cut three times and then press
3.
Enter/Pause.
If you enter the wrong password, you return to the Main Menu.
From the Diagnostics Menu, press  or  until you see
4.
DIAGNOSTICS
 User Diag
Press Enter/Pause. Then, press  or  until you see
5.
USER DIAG
 Password
6. Press Enter/Pause. You will see
Enable Password?
 No
The default for password protection is "No," so you will always see
"No" even if passwords are enabled.
10-4 Operator's Handbook