For Grounding The Inverter Housing; For Wiring Rs485, Digital Inputs And Dry Contacts; For Setting Up A Power Limitation - Delta RPI M6A Installation And Operation Manual

Part name
Open end spanner

5.14.4 For grounding the inverter housing

Part name
Grounding cable

5.14.5 For wiring RS485, digital inputs and dry contacts

Part name
Cable

5.14.6 For setting up a power limitation

Part name
USB-RS485 adapter with RS485
cable
Delta Service Software
Installation and Operation Manual for RPI M6A M8A M10A inverters V1.0 2016-02-03
Quantity Description
Used to disconnect the DC plugs or safety caps from the DC inputs. Avail-
able at Multi-Contact.
1
Quantity Description
Typically a yellow/green copper cable with minimum wire size of 6 mm
to be used. M4 screw, washer, spring washer and toothed lock ring are deliv-
-
ered with the inverter. You need a cable lug.
Always consider local regulations regarding the cable requirements.
Quantity Description
Twisted and shielded cable with a wire cross-section of 1 mm
-
diameter of 5 mm.
Quantity Description
To set up a power limitation during the installation, e.g. to fulfil the 70% regu-
1 lation in Germany. The USB-RS485 adapter can be ordered at Delta. The
RS485 cable can be standard cable.
1 To change the parameters for power limitation. Can be ordered at Delta.
5 Planning the installation
has
2
and a cable
2
37