Event - Dahua NVR6000 Series User Manual

Parameter
Port
Path
Add
Enable/Disable
5.7.3

Event

5.7.3.1 Video detect
5.7.3.1.1 Motion Detect
The motion detect interface is shown as in Figure 5-47.
Function
ISCSI server port. Default setup is 3260.
It is to set remote path. Click browse button to select.
Note
Each path is a iSCSI share disk. The path is already there when you
create on the server.
After you set server IP, port, user name, password and path, click
Add button to add new information on the list.
Click enable/disable and then click OK to save.
Figure 5-47
114