Overview And Controls; Front Panel; Nvr 60 Series - Dahua NVR6000 Series User Manual

2 Overview and Controls

This section provides information about the rear panel. When you install this series NVR for the
first time, please refer to this part first.

2.1 Front Panel

2.1.1 NVR 60 Series

For the product of LCD, the front panel is shown as below. See Figure 2-1.
Please refer to the following sheet for detailed information.
SN Name
1 Power button
2 System HDD
Indication light
3 Alarm indication
light
4 Network
indication light
5 USB port
6 Front panel lock
Another front panel, it is shown as in Figure 2-2.
Function
Press it once to turn on the device.
Press it for a long time to turn off the device (Usually we do not
recommend).
Press power button for a long time or pull out the power cable may
result in device auto restart.
The blue light flashes when system is reading or writing the system
HDD.
In the system HDD, there are device important configuration file,
factory default configuration file, device initial boot up data.
The alarm indication light becomes on once an alarm occurred. It
becomes on via the software detection. The alarm includes local
alarm, no disk and etc.
The network indication light is blue and it flashes when you connect
the device to the network.
/
/
Figure 2-2
Figure 2-1
6