Image/Alarm Out; Image - Dahua NVR6000 Series User Manual

Parameter Function
You can turn on or turn off the light/wiper.
Light and
wiper

5.5 Image/Alarm out

Select one monitor channel video and then click Image button in section 8, the interface is shown
as Figure 5-10.

5.5.1 Image

Here you can adjust its brightness, contrast, hue and saturation. (Current channel border
becomes green).
Or you can click Reset button to restore system default setup.
3D Intelligent Positioning
Key
You can click this icon to
display or hide the PTZ
control platform.
Figure 5-9
86