Display - Dahua NVR6000 Series User Manual

Camera Masking
When someone viciously masks the lens, or the output video is in one-color due to the
environments light change, the system can alert you to guarantee video continuity. Camera
masking interface is shown as in Figure 3-77. You can enable alarm output channel and then
enable show message function.
Tips:
You can enable preset/tour/pattern activation operation when video loss occurs.
Note:
In Detect interface, copy/paste function is only valid for the same type, which means you can
not copy a channel setup in video loss mode to camera masking mode.

3.5.7 Display

Display setup interface is shown as below. See Figure 3-78.

Channel name: Here is for you to modify channel name. System max support 25-digit (The
value may vary due to different series). Please note all your modification here only applies to
NVR local end. You need to open web or client end to refresh channel name.

Time display: You can select to display time or not when system is playback.

Channel display: You can select to channel name or not when system is playback.

Screen mode: The NVR724 series is the multiple-screen output. It is to view the output
screen number and its resolution.

Screen2 display: Check the box here to display the second screen. The second screen can
realize 4-channel decode in one window.

Screen No.: You can select from the dropdown list.

Resolution: There are two options: 1280
Please note the system needs to reboot to activate current setup.

Enable tour: Activate tour function.

Interval: System supports 1/4/8/9/16/25/36/64-window tour. The 2
window only. Input proper interval value here. The value ranges from 5-120 seconds. In tour
Figure 3-77
× ×
720, 1280 1024(default), 1920
×
768, 1920×1080.
nd
screen supports 1/4-
62