Overview Of Navigation And Controls; Login - Dahua NVR6000 Series User Manual

3 Overview of Navigation and Controls

Connect the device to the monitor and then connect a mouse and power cable. Click the power
button at the front panel and then boot up the device to view the video output. You can use the
mouse to implement some GUI operation.

3.1 Login

Right click mouse, you can see system pops up the login interface for you to input user name
and password.
You can use USB mouse to input. Click
(small/capitalized) and denotation.
Note:
For security reason, please modify password after you first login.
Continuous three times login failure will result in system alarm and five times login failure will
result in account lock.
After device booted up, the system is in multiple-channel display mode. See Figure 3-2.Please
note the displayed window amount may vary. The following figure is for reference only.
You can overlay the corresponding date, time and channel name on each screen. You can refer
to the following sheet for channel record or alarm status information.
1
Recording status
2
Motion detection
to switch between numeral, English character
Figure 3-1
Figure 3-2
3
Video loss
4
Monitor lock
15