System Settings; Configuring Alarm Event Settings; Configuring Video Detect Settings - Dahua MNVR4104-I Series User Manual

You can set up system information following instructions on the Local interface or web interface. This
section introduces the web interface instructions. The Local interface is similar and would not be
elaborated here.
Some functions can only be configured on the Local interface. The actual interface shall prevail.

Some functions are not used in actual operations, so they are not described in detail in the

document.
In this section, when you have configured the settings for a channel, click Copy to apply the

settings to other channels. Click Refresh to display the latest configuration. Click Default to
restore to factory default settings.

Configuring Alarm Event Settings

Alarm information settings include the setting of video detection, alarm input, abnormality and
alarm output.

5.1.1 Configuring Video Detect Settings

Video detection includes motion detection, video loss, and tampering. This function detects the
abnormal changes and triggers alarms.
5.1.1.1 Configuring Motion Detect Settings
When the moving object appears and moves fast enough to achieve the preset sensitivity value, the
system triggers an alarm and alarm linkage.
On the main web interface, select ALARM > Video Detection > Motion Detect.
Select the channel number and select Enable to enable the motion detect function for the
channel.
Set MD region.
Click Setting behind Region.
1)
The Setting interface is displayed.
5

System Settings

55