Configuring Event Triggered Snapshot - Dahua DH-XVR42 AN-I Series User Manual

Ai digital video recorder

Table of Contents

Select Main Menu > CAMERA > Encode > Snapshot.

In the Type list, select Scheduled, and then configure other parameters.

Click Apply to save the settings.

● If you have configured the snapshot schedule, the configuration has been completed.

● If you have not configured the snapshot schedule, see "5.1.4.10 Configuring Snapshot

Storage Schedule".

5.8.1.2 Configuring Event Triggered Snapshot

Select Main Menu > CAMERA > Snapshot > Encode.

Figure 5-90 Enable snapshot

Figure 5-91 Type list

User's Manual

Do you have a question about the DH-XVR42 AN-I Series and is the answer not in the manual?