Manual Record - Dahua NVR6000 Series User Manual

3.7.4

Manual Record

Note:
You need to have proper rights to implement the following operations. Please make sure the
HDD has been properly installed.
3.7.4.1 Manual record menu
Right click mouse on the preview mode or in the main menu, from Advanced->Manual
Record, you can see manual record menu is shown as in Figure 3-91. You can click the
PgUp/PgDn button to view more channels.
3.7.4.2 Basic operation
There are two modes: main stream and extra stream. There are three statuses:
schedule/manual/stop. Please highlight icon"○" to select corresponding channel.

Manual: The highest priority. After manual setup, all selected channels will begin ordinary
recording.

Schedule: Channel records as you have set in recording setup (Main Menu->Setting-
>Schedule)

Stop: All channels stop recording.
3.7.4.3 Enable/disable record
Please check current channel status: "○" means it is not in recording status, "●" means it is in
recording status.
You can use mouse or direction key to highlight channel number. See Figure 3-92.
Figure 3-91
Figure 3-92
70