Connecting Cables - Hamamatsu Photonics C9100-02 Instruction Manual

C9100-02 Ver.1.7

7. CONNECTING CABLES

Refer to the figure below when connecting the various cables.
Camera
② CameraLink interface cable
•
When cables are connected, confirming the power switch is in the OFF position.
① Camera cable (Option: A9189-05)
Camera used for connecting the camera to the AC adaptor.
② CameraLink interface cable (Option: A9262-05)
Cable used for connecting the CameraLink interface connector to the CameraLink
interface board mounted on the host computer.
③ Power supply cord (Option: The accessories of A3472-07)
•
Hamamatsu recommends optional interface for C9100.
Note
- AC adaptor
- Camera cable
- CameraLink interface cable A9262-05
Depending on type of interface cables, the C9100 may not keep CE marking
compliance in terms of EMC directive.
10
① Camera cable
(Option)
A3472-07
A9189-05
AC adaptor
A3472-07 (Option)
(Option)
PC
Fig.7-1
③ Power supply cord
CameraLink interface board