Power Specifications - Hamamatsu Photonics C9100-02 Instruction Manual

13-6 POWER SPECIFICATIONS

・ Connector
・ Product No.
・ Maker
[C9100 Series Pin Assignment]
No.
1
+12V (Camera)
2
3
4
5
+12V (Peltier)
6
7
GND (Peltier)
8
9 SPARE
10
11
+12V (Peltier)
12
13 SPARE
14
GND (Camera)
15
GND (Peltier)
Note
(D-SUB 15 pin)
DA-15PF-T-N
JAE
Name
Current 2.0 A (max.), Ripple peak to peak ± 60 mV (max.)
N.C.
N.C.
N.C.
Current 5.0 A (max.), Ripple peak to peak ± 60 mV (max.)
N.C.
N.C.
Connected to GND(Camera) via 0 ohm resister.
N.C.
Current 5.0 A (max.), peak to peak ± 60 mV (max.)
N.C.
Connected to GND(Camera) via 0 ohm resister.
• N.C. means non-connection.
• The 5-pin is connected to the 11-pin and the 7-pin is connected to the
15-pin inside camera.
• The current of +12 V (Peltier) is total of the 5-pin and the 11-pin.
• The two +12 V power supplies for camera and peltier are necessary for
good performance of the camera.
C9100-02 Ver.1.7
Specs.
25