Hamamatsu Photonics C9100-02 Instruction Manual page 5

Connecting and disconnecting cables
Always turn off the power before connecting and disconnecting cables.
Affixing the camera
When fitting the camera to a tripod or other fixture, use the screw
(1/4-20UNC) in the center of a camera mount or the threaded sleeve
(M3) about the mount's perimeter. Be careful not to allow the fitting
screw to enter more than 5 mm from the surface of the mount.
Screwing this in excessively may impair normal operation.
Lenses
Be careful not to screw the lens more than 7 mm onto the C-mount of
the camera. Doing so can scratch the protective glass. (Some wide
angle lenses in particular can have a thread of 7 mm or more.)
Shipping precautions
When transporting the camera by truck, ship, airplane, etc., wrap it
securely in packaging material or something similar.
Do not subject the camera to strong shocks
Dropping the camera or other shocks can damage the camera.
Disposal
When disposing of the system, take appropriate measures in
compliance with applicable regulations regarding waste disposal and
correctly dispose of it yourself, or entrust disposal to a licensed
industrial waste disposal company. In any case, be sure to comply
with the regulations in your country, state, region or province to ensure
the system is disposed of legally and correctly.
CAUTION
C9100-02 Ver.1.7
3