Name And Function Of The Parts; Camera - Hamamatsu Photonics C9100-02 Instruction Manual

C9100-02 Ver.1.7

6. NAME AND FUNCTION OF THE PARTS

6-1

CAMERA

①
① Lens mount
C-mount lens or optical system with C-mount can be attached.
Note
② Blowhole
The fan circulates the air in order not to increase inside temperature.
③ Screw holes to fix the camera (each four holes on the upside and downside)
When the camera is used with a tripod, the tripod attachment should be attached with
the screw holes.
④ Timing I/O connector [TIMING I/O]
This connector is used for input and output of timing signals when synchronizing with
external equipment.
⑤ Camera connector [POWER]
This is for connecting a camera to an AC adaptor with a camera cable.
Note
8
② ③
•
C-mount has a depth of 7 mm. Screwing the lens too far into
the camera may scratch the glass surface.
•
Do not block ventilation openings.
•
Please set for the screws in order not to enter 5 mm or more.
•
AC adaptor: A3472-07 is an option. As for the details of the AC
adaptor, see the instruction manual of the product attachment
separately.
③
Fig.6-1
④ ⑤
⑥ ⑦