SERVICING YOUR GENERATOR
FUSE
If the fuse is blown, the starter motor won't operate.
In the event of fuse failure, locate the cause of failure and repair it
before you continue operation. If the fuse continues to fail,
discontinue generator use and consult an authorized Honda generator
dealer.
1. Turn the engine switch to the OFF position and remove the key
before checking or replacing the fuse.
BLOWN FUSE
2. Remove the fuse holder
cover and pull the fuse out.
3. Replace the fuse with a fuse
of the same type and rating.
Specified fuse: 5 A, 20 A
Never use a fuse with a
different rating from that
specified. Serious damage to
the electrical system or fire
may result.
4. Install the fuse holder cover in the reverse order of removal.
64
20 A FUSE
5 A FUSE
FUSE HOLDER COVER