ASSEMBLY
Wheel Kit Installation
1. Install the two stands on the under frame using two 8×20 mm flange
bolts, two 8×45 mm flange bolts, and two collars.
2. Install the two wheels on the axle shaft using the plain washers and
split pins. After installing the split pins, bend the pins to ensure that
the wheels are secured to the axle.
3. Install the axle assembly on the generator using four 8×16 mm
flange bolts.
TORQUE: 17–22 lbf·ft (24–29 N·m, 2.4–3.0 kgf·m)
8×20 mm
FLANGE BOLT (2)
8×45 mm
FLANGE BOLT (2)
COLLAR (2)
STAND (2)
98
AXLE SHAFT
WHEEL (2)
8×16 mm
FLANGE BOLT (4)
4.0×28 mm
SPLIT PIN (2)
20 mm
PLAIN WASHER (2)