Gfci System ② (120V-20A Duplex Receptacle) - Honda EB10000 Owner's Manual

OPERATION
GFCI System ②
(120V-20A Duplex Receptacle)
1. Unplug all tools and appliances from the generator.
2. Start the engine (see page 29).
3. Turn OFF the auto throttle switch (see page 30).
4. Turn the AC circuit breaker to the ON position.
When the GFCI is operating normally, the indicator will continuously
light green.
Light order:
(red) Blink once  (green) Light once  (red) Blink once
 (green) Lights continuously
• If the green indicator does not light on, press the RESET button.
• If the red indicator starts to blink continuously, contact an authorized
Honda generator dealer.
5. Press the TEST button:
• The RESET button will pop out and the green indicator will go off.
• If the GFCI does not function as described, contact an authorized
Honda generator dealer.
AC CIRCUIT BREAKER
ON
AUTO THROTTLE SWITCH
36
GFCI SYSTEM ②
(120V-20A DUPLEX RECEPTACLES)
INDICATOR
TEST BUTTON
RESET BUTTON