STORAGE
2. Pull out the carburetor drain tube end under the fan cover of the
engine, and place it in a suitable container.
3. Remove the air cleaner cover (see page 51).
4. Loosen the carburetor drain screw.
If the drain screw is difficult to loosen, wrap duct tape around the
screwdriver stem until the diameter becomes 8 mm as illustrated.
By doing so, the screwdriver is easily inserted into the cutout
portion of the drain bolt, and you can loosen the drain bolt easily.
5. Drain the gasoline from the carburetor into the container.
6. Tighten the carburetor drain screw securely.
7. Install the air cleaner cover (see page 52).
CARBURETOR DRAIN SCREW
68
DUCT TAPE
CARBURETOR DRAIN TUBE