About Each Channel - involight LEDMH100 User Manual

SPCO SP01~15
r PAN STND
REV
R TILT STND
REV
r-PT STND
REV
TEST ALL
PAN
TITL
RED
GREEN
BLUE
DISP STND
REV
REST REST/ON Reset
ON
16BT
OFF

4. ABOUT EACH CHANNEL

■
Channel 1:DMX MODE
Ch DMX Function
0~24 RGB
Built-in program
25~49
CH1 1
Built-in program
50~74
2
Built-in program
75~99
3
LEDMH100 MOVING HEAD
Pr1-4 means skip
Pr5-8 means fade
Auto speed SP01: 0.1sec/step, SP15: 10secs/step
Run clockwise as DMX value increases
Run anticlockwise as DMX value decreases
Run clockwise as DMX data increase
Run anticlockwise as DMX data decreases
CH7: PAN, CH8: TILT, CH10: PAN FINE, CH11: TILT FINE.
CH7: PAN, CH8: TILT, CH10: PAN FINE, CH11: TILT FINE.
Check all channels with motors
Check pan channels
Check tilt channels
Check red channels
Check green channels
Check blue channels
Display bites normally
Display bytes upside down
(Press ENTER button to enter into REST menu and the screen
reads flashing "REST". Then press UP/DOWN button and the
screen reads flashing "ON". If to press ENTER again, the light
engine resets again)
PAN, TILT is 16 bit, CH10: PAN FINE, CH11: TILT FINE.
PAN, TILT is 8 bit. CH10, CH11 does not exist.
CH2
Red
0~255
No
function
7
CH3 CH4
Green Blue
0~255 0~255
No No
function function
CH5 CH6
Strobe Dimme
Speed r
0~255 0~255
No
Auto
functio
speed
n