Russound MCA-C5 Service Manual page 99

7. Press and release the S+ button on the RCK.
Sound will not be heard from the speakers.
The RCK display shows Zone 1 Source 2.
Click the "Send' button twice next to the R 7.0.0.6.3.4.0.0 command.
The logging window will display the following:
Line 7 and 9 returned a value of 1 indicating no Audio Sensing Source 1.
When the Logging Window changed states from Zero to 1 this indicates
Source 1 Audio Sensing has passed the test.
8. Click the "Send" button next to the E 193 0:0:0 1 command.
Sound will be heard from the speakers.
Click the "Clear" button below the "Logging" window.
Click the "Send" button three times next to the R 7.0.0.6.3.4.1.0 command.
Press and release the S+ button on the RCK.
The RCK display shows Zone 1 Source 3.
Sound will not be heard from the speakers.
Click the "Send" button twice next to the R 7.0.0.6.3.4.1.0 command.
When the Logging Window changed states from Zero to 1 this indicates
Source 2 Audio Sensing has passed the test.
MCA-C5 Test Procedure
Rev 1.5
Page 57 of 78