Inspection; Equipment Needed; Russound Supplies Items Needed - Russound MCA-C5 Service Manual

Russound customers expect the best; defects are unacceptable. Inspect the Unit
Under Test visually for any blemishes, missing pieces and visual indications that
may cause concern. Passing visual inspection is a condition of passing full test.
Correct any defect before passing the Unit Under Test; if Unit Under Test has
defects that cannot be corrected, notify your supervisor. Inspect the Unit Under
Test before and after functional testing. Inspect the Gift Box and its contents
comparing it to the list on the outside of the box.
1. (1) IBM PC with Windows XP SP2 with
DVD player
2 Gigs of RAM
Com port (9 Pin serial)
Ethernet Port
Sound Card
2. (1) RS232 cable (9 Pin)
3. (11) 6' or longer RJ45 patch cords
4. (18) 6' or longer quality RCA Audio cable color coded
Red and White
5. (1) Pair of 8 Ohm 20W minimum speakers
6. (1) DVD or CD player
7. (1) Dual Channel Oscilloscope with isolated inputs 20Mhz bandwidth minimum
(Tektronix TPS2012 or equivalent)
8. (1) 4 Port Switch for Ethernet Port of the IBM PC
9. (17) 6' or more 3.5mm mono plug patch cable
10. (1) USB A-to-B cable
11. (1) DB9 Serial Port Switch with cables (3 DB9 Male-to-Male cables)
Russound Supplies items needed below
12. (1) Flash Development Toolkit 4.01
13. (1) Russound IR Switcher PCB (CM can build their own)
14. (1) RCK Keypad, RNET Control Keypad (CM can build their own)
15. (3) RSS, Russound Source Selector (CM can build their own)
16. (1) RVCLIScripter latest version
17. (1) RNET Version Reader v1.01.02
18. (1) Russound Firmware Update Utility v1.0.8
19. (2) R235LS Amplifier
20. (6) ST2-PS, 12V 1.25A power pack for RCK and RSS
21. (8) MDK-C5 Keypads
22. (1) SRC2 Remote Control
23. (1) Mprog3.0a

Inspection

Equipment Needed

MCA-C5 Test Procedure
Rev 1.5
Page 3 of 78