Mac Address; Enable Sources - Russound MCA-C5 Service Manual

1. The following dialog will display.
Press the space bar.
2. The Incoming window in the Logging section displays the MAC address.
Confirm the MAC address matches the label on the gift box.
3. Press the space bar since to start the next group.
4. Continue to the

"Enable Sources"

1. Press the space bar at the "Enable Sources" dialog.
2. Press the space bar to start the next group "Zone 1".
3. Continue to the "Zone 1"

MAC Address

script".
Enable Sources
script.
MCA-C5 Test Procedure
Rev 1.5
Page 43 of 78