Russound MCA-C5 Service Manual page 63

11. Click "Device" then "Download Active File" menu.
12. If you see a dialog similar to "This file is not a SRecord" click ok to
continue.
13. You will observe a progress bar at the bottom of the FDT 4.01 window.
The bottom window will display in green when the MCA-C5 has been
successfully programmed.
14. Press the power button on the MCA-C5 to turn it off.
15. Move the Controller ID Switch to the position 1.
16. Close FDT 4.01.
17. Continue by performing the "Russound Firmware Update
MCA-C5 Test Procedure
Rev 1.5
Page 21 of 78
Utility" section.