Lexmark CS310 Series User Manual page 68

Understanding the printer menus
Use
Eco‑Mode
Off
Energy
Energy/Paper
Paper
Quiet Mode
Off
On
Run Initial Setup
Yes
No
Paper Sizes
US
Metric
Home screen customization
Change Language
Search Held Jobs
Held Jobs
USB Drive
Bookmarks
Jobs by User
Alarms
Alarm Control
Cartridge Alarm
To
Minimize the use of energy, paper, or specialty media.
Notes:
•
Off is the factory default setting. This resets the printer to its
factory default settings.
• Energy minimizes the power used by the printer. Performance
may be affected, but print quality is not.
• Energy/Paper minimizes the use of power, paper, and
specialty media.
• Paper minimizes the amount of paper and specialty media
needed for a print job. Performance may be affected, but
print quality is not.
Minimize the printer noise.
Note: Off is the factory default setting.
Run the setup wizard.
Specify the unit of measurement for paper sizes.
Notes:
•
U.S. is the factory default setting.
• The initial setting is determined by your country or region
selection in the initial setup wizard.
Change the icons that appear on the home screen.
For each icon, select from the following options:
Display
Do not display
Set an alarm when operator intervention is required.
For each alarm type, select from the following options:
Off
Single
Continuous
Notes:
• Single is the factory default setting for Alarm Control. This
sounds several short beeps.
•
Off is the factory default setting for Cartridge Alarm.
• Continuous repeats several short beeps at a regular interval.
68