Taking Pictures - Yaesu FTM-400DR Operating Manual

1
Insert the micro-SD card and turn the radio ON
2
Point the camera lens at the object to be
photographed and press the shutter button on the
microphone
Caution Keep a focal distance of at least 50 cm between the
object and the camera. The picture will be out of
focus when the object is too near and the image will
not be clear.
Tip In factory default, pictures will be taken with a size of 320
✽ 240 in the NORMAL picture quality.
The size (resolution) and quality (compression ratio)
of the picture can be set using
The picture taken will appear in the display for
several seconds.
Subsequently, the picture will be stored in the micro-
SD card that has been inserted into the main body
card slot in JPEG format.
Tips • It takes about 30 seconds to transmit a picture taken
with a resolution of 320 ✽ 240 to another transceiver.
• Press the microphone
picture transmission (it may take a while for the
transmission to be canceled).
• After the picture is transmitted, the mode will
automatically switch to DN of the AMS mode.
The first picture taken will be saved under the filename "M✽✽✽✽✽000001.jpg" while the pictures
taken subsequently will be saved under the filenames "M✽✽✽✽✽000002.jpg", "M✽✽✽✽✽000003.jpg"
and so on in increasing order.
The folder configuration in the micro-SD card is as follows and the data of the pictures taken is saved
in the folder named "PHOTO" under the root directory.
Root
FTM400D
BACKUP
GPSLOG
PHOTO
GM
PHOTO
QSOLOG
142
in the set-up menu ( P.200).
button to cancel the
Transmit
picture Shutter
button button
Lens