Displaying The Compass Screen - Yaesu FTM-400DR Operating Manual

Two navigation methods may be used in the smart navigation function.
(1) Real-time navigation function
In the C4FM digital V/D mode, the position and direction of the received partner
station can be displayed in real time during the communication because the position
information obtained from the GPS is transmitted at the same time as the voice signal.
(2) Backtrack function
By registering the departure or other points in advance, the distance and direction
from the current position to the registered location can be displayed in real time.
When using the navigation function, use the "Compass Screen" to display the direction
of your station and the partner station on a compass.
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch
The menu list will be displayed.
3
Touch
"COMPASS"
Each time this symbol is touched, the setting will
switch between "COMPASS" and "NUMERIC".
Press for one second or longer
The display will return to the previous screen.
5
Press briefly
The screen with the compass panel in the center will
be displayed.
The direction from your station to the partner station
will also be displayed using a compass needle.
Tip The compass needle will not be displayed when there is
no position information.
6
Press briefly
The display will return to the normal frequency display screen from the Compass screen.
Tip When the Altitude display screen and Timer/Clock screen are both "ON", the screen will
change in the following order each time
to select
is pressed.
93