Displaying The Position Information; Displaying The Position Information Of The Partner Station - Yaesu FTM-400DR Operating Manual

position information
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch
The menu list will be displayed.
3
Touch
Each time this is touched, the setting will switch
between "COMPASS" and "NUMERIC".
Press for one second or longer
The display will return to the previous screen.
5
Press briefly
The latitude and longitude display screen will be
displayed.
6
Touch
The latitude and longitude of your station will be
displayed in numerical figures.
Tip When the Altitude display screen and Timer/Clock screen
are both "ON", the screen will change in the following
sequence each time
In the C4FM digital V/D mode, the position and direction to the partner station can be
displayed in real time during the communication. The position information obtained from
the GPS is transmitted at the same time as the voice signal.
1
Switch the communication mode to AMS (auto mode select function) or digital mode,
or activate the GM function
Tip Refer to "Using the GM function" (
2
Switch to the latitude and longitude display screen
3
Touch
The latitude and longitude of the partner station will be displayed in numerical
figures.
to select "NUMERIC"
is pressed.
P.99) on the basic method of using the GM function.
87