Using Dcs - Yaesu FTM-400DR Operating Manual

5
Turn to select the DSC code
Tip Factory default value: 023
6
Touch
The characters of the set value will turn green in
color.
7
Press for one second or longer
The DCS code will be set and the display will return to the previous screen.
Tip The display can also be returned to the previous screen by touching
1
Press
The function menu will be displayed.
2
Touch to display "D-TRX"
Tips • When
or to change the menu.
• The squelch type changes in the following sequence
each time it is touched.
"NOISE" "T-TX" "T-TRX" "T-REV" "D-TRX" "PRGM"
"PAGER" "D-TX"* "TT/DR"* "DT/TR"*
* These squelch types will be displayed when
in the set-up menu.
The squelch will open only when the set DCS code is
received.
A bell can be rung (beep) when signals containing the same DCS code are received (
is not displayed in the menu, use
is set to "ON"
twice.
P.110).
105