Displaying The Band Scope - Yaesu FTM-400DR Operating Manual

3
Touch
The menu list will be displayed.
Touch to select the modulation mode
The modulation mode changes in the following order
each time the screen is touched:
"AUTO (FM)": Automatically switches the modulation
mode to match the frequency band
"FM": Switches to the FM mode.
"NARROW FM": Switches to the Narrow FM mode.
"AM": Switches to the AM mode.
Factory default value: AUTO (FM)
5
Press for one second or longer
The modulation mode is set up and the display
returns to the previous screen.
The band scope can display a graph of the signal activity of the channels surrounding
the memory channel or frequency that has been set up in the operating band. The
display is centered on the current operating frequency.
1
Touch
will turn orange and the band scope will be
displayed.
The range to be shown can also be adjusted. Refer to
"Setting the width of the band scope" (
The degree of modulation becomes
half the normal level.
P.172).
47