Loading Paper In The Bypass Tray - Ricoh SP 3400N Operating Instructions Manual

Loading Paper in the Bypass Tray

Important
❒ Set the size and direction of the loaded paper using Smart Organizing Moni-
tor or the printer driver. Make sure the settings do not conflict. Otherwise, the
paper may jam or the print quality may be affected.
❒ Load paper with the print side up, and in the short-edge feed direction.
❒ If paper is curled, straighten it before loading, by bending it the paper in the
opposite direction to the curl, for example.
❒ Do not load paper while the printer is printing.
❒ You cannot load paper when the printer is in Energy Saver mode. To disable
Energy Saver mode, click the {Stop/Start} key on the control panel.
A
Open the bypass tray.
If you load A4 (297 mm) or larger size paper, pull out the bypass tray extension.
BXG050
BXG051
Loading Paper
4
53