Table of Contents
Advertisement
WM-#46 CLERK IS BEING USED
Sign off the clerk in R position. Then sign on the clerk again in the appropriate control key position by entering
clerk code and pressing CLERK ID key.
(displayed when Z report or program sequence is performed during transaction)
WM-#47
NOT USED
WM-#48 PLU CODE CHECK DIGIT ERROR
Enter correct PLU code.
WM-#49 PLU CODE PRICE CHECK DIGIT ERROR OF IN-STORE MARKING CODE
Enter correct PLU code.
WM-#50
NOT USED
WM-#51
NOT USED
WM-#52
NOT USED
WM-#53
NOT USED
WM-#54 CUSTOMER BILL MEMORY NOT EXIST
(displayed when optional memory board has not been installed)
WM-#55 CUSTOMER BILL MEMORY IS NEAR FULL
WM-#56 CUSTOMER BILL MEMORY IS FULL
Take Z-78 Customer Bill report to reset customer bill memory.
WM-#57 Dot Printer: PRINT FONT DATA IN RAM IS FAIL
Original print font data in ROM is copied and written into RAM automatically.
WM-#58~62
NOT USED
WM-#63 PREPARATIONS FOR EURO CONVERSION ARE NOT COMPLETED
[SF-54.e=1], PGM-397, PGM-101
WM-#64 ENTERED NUMBERS FOR EURO CONVERSION SEQUENCE IS NOT CORRECT
WM-#65 SCANNER COMMUNICATION ERROR
WM-#66~68
NOT USED
WM-#69 JOURNAL DATA TRANSFER BUFFER IS FULL
WM-#70 IRC LINE (RS485) IS BUSY
WM-#71 ECR IS IN COMMUNICATION WITH EFT TERMINAL
WM-#72 EFT TERMINAL COMMUNICATION ERROR
Press CL key.
WM-#73 CARD DATA ABORTED BY EFT TERMINAL
WM-#74 ENTER VOUCHER NUMBER PRINTED ON A RECEIPT OF EFT TERMINAL
WM-#75 SLIP PRINTER ERROR
Confirm the setting of slip printer. Refer to INTERFACES & PERIPHERALS MANUAL for details.
WM-#76 ENTER CORRECT CLERK CODE FOR TIME-IN OPERATION
WM-#77 TIME-IN OPERATION ALREADY DONE
WM-#78 TIME-IN OPERATION HAS NOT BEEN DONE YET
WM-#79 TIME & ATTENDANCE MEMORY IS FULL OR MEMORY NOT EXIST
Take Z-19 Time & Attendance report.
(displayed when optional memory board has not been installed)
WM-#80 ESF MEMORY IS FULL
Clear ESF data by issuing Z-79 report with data print by [SF-78.c], by taking Z-8879 by PC (from Tensai2000), or
by taking Z-79 report by PC batch communication. See also MISCELLANEOUS MESSAGES "ESF NEAR
FULL".
WM-#81~84
KITCHEN PRINTER 1 ~ 4 ERROR
Confirm the setting of printers. Refer to INTERFACES & PERIPHERALS MANUAL for details.
WM-#85~88
NOT USED
WM-#89 EFT TERMINAL IS OUT OF ORDER
Set "Storing EFT" for C-ZAM EFT terminal according to Dutch bank specification.
WM-#90 COMMUNICATION TIME OUT
WM-#91 WEIGHT HAS NOT BEEN CHANGED (ITEM NOT REMOVED)
(displayed only when the scale has been programmed this way)
WM-#92
NOT USED
WM-#93 TARE WEIGHT ENTRY IS OVER FLOW
WM-#94 TARE WEIGHT ENTRY IS COMPULSORY
(can be released temporarily by using OFF COMPULSORY key)
WM-#95 MANUAL TARE WEIGHT ENTRY IS PROHIBITED
WM-#96 THIS PLU IS NOT SCALABLE PLU
WM-#97 SCALE COMMUNICATION ERROR / WEIGHT ERROR
Confirm the setting of scale. Refer to INTERFACES & PERIPHERALS MANUAL for details.
Reduce the item on the scale or put the item if the weight display is zero. This is displayed if the item weight on the
scale exceeds the limit weight of the scale or the item weight is zero when SCALE key is pressed.
117
Hide quick links:
Advertisement
Table of Contents
