Uniwell LX-5600 Operation Manual page 102

Report Sequence
Full Report
<X or Z>--(report #)--[X2]--[ENTER/TTL 25]
or {select from the list}--[ENTER/TTL 25] or {select FULL REPORT and press [ENTER/TTL 25]}
Individual Report
<X or Z>--(report #)--[X2]--(*required #)--[ • ]--[TTL 25]
or {select from the list}--{select INDIVIDUAL REPORT}--(*required #)--[ • /ENTER]--[TTL 25]
Sequential Report
<X or Z>--(report #)--[X2]--(*start #)--[X2]--(*end #)--[ENTER/TTL 25]
or {select from the list}--{select SEQUENTIAL REPORT}--(*start #)--[X2]--(*end #)--[ENTER/TTL 25]
X/Z-78 Customer Bill Sequential Report (Optional memory board required)
<X or Z>--(78)--[X2]--(*start #)--[*see table below]--(*end #)--[ENTER/TTL 25]
or {select from the list}--{select SEQUENTIAL REPORT}--(*start #)--[*]--(*end #)--[ENTER/TTL 25]
* required #, start/end #
Clerk report
Group report
PLU report
Track report
Customer bill report
(#78)
Function program
dump report (#85)
Full Report
40 PLU 1st
FULL REPORT
SEQUENTIAL REPORT
INDIVIDUAL REPORT
X
Enter the sequential clerk number (not 4-digit clerk code) for clerk reports.
Enter the group number.
HARD PLU key and Scanner can be used to enter PLU code.
Before entering PLU code, MENU SHIFT/PLU MODIFIER keys can be pressed if
required.
Enter the track number.
(78)-[X2]--(start track #)--[TRACK #]--(end track #)--[ENTER/TTL 25]
(78)-[X2]--(start date or date & time or time)--[X2]--(start date or date & time or
time)--[ENTER/TTL25]
date: mmddyy or ddmmyyyy [SF-7.f] Check date format on the front display.
date & time: mmddyyyyhhmm or ddmmyyyyhhmm
time: hhmm If you specify time only, it is considered as today's time.
Refer to the table shown on
Sequential Report
FULL REPORT
SEQUENTIAL REPORT
INDIVIDUAL REPORT
X
FIRST PLU No
P--------------1
PLU-NAME 00001
LAST PLU No
X <
page 101.
40 PLU 1st
↓
40 PLU 1st
10>
99
Individual Report
40 PLU 1st
FULL REPORT
SEQUENTIAL REPORT
INDIVIDUAL REPORT
X
↓
40 PLU 1st
X < >