Uniwell LX-5600 Operation Manual page 109

Lx-5000 series
Hide thumbs Also See for LX-5600:
Table of Contents

Advertisement

Tax
Printed by [SF-26.a]. When using the VAT system, the taxable subtotal can be programmed not to include tax by [SF-22.c].
When using the add-on tax system, the taxable subtotal does not include tax. If programmed, adjustment, %, plus and
discount calculations will affect each taxable subtotal.
Tip
Total amount of all clerk' tips. Tip will also be added to a media memory by [SF-29.f].
Cash in Drawer Amount
Total of the media in drawer amounts that are programmed to be added to CID.
New Balance
The amount closed by NB key for simple item track and PB+/PB- operations. Includes tax and percentage calculations if tax
and percentage are calculated on closing by NB key [SF-16.g]. This amount does not reset to zero after the track or PB+/PB-
operation is closed by a media key.
Previous Balance Plus
The count is the total number of times that a track was opened when the previous balance was either zero or positive and a
PB+ key was used. The amount is the accumulation of positive previous balances that were picked up when a track was
opened and an amount was entered by PB+ operations.
Previous Balance Minus
The count is the total number of times that a track was opened and a PB- key was used.
The amount is the accumulation of negative previous balances that were picked up when a track was opened and an amount
was entered by PB- operations.
Net Charge
Net charge shows the total amount of all non-closed transactions. It is calculated from the new balance and the previous
balances.
Grand Total
Grand Total 1 can be reset by issuing the Z-07 or Z-01 ([SF-27.a=1]).
Grand Total 2 is the accumulated grand total. (not resettable)
Grand Total X is the grand total of training transactions. (not resettable)
If programmed by [SF-29], grand total is calculated by: each PLU amount, % amount, plus amount, discount amount and tax
amount.
Report Count
There are three kinds of report counts: X (read only), Z1 (1st level read/reset) and Z2 (2nd level read/reset).
Each Z count will be increased only when a Z-01/Z-02 report is issued or when any Z report is issued by [SF-26.b].
106

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx-5700Lx-5750

Table of Contents