Uniwell LX-5600 Operation Manual page 119

WM-#29 SIMPLE CONDIMENT PLU INPUT IS COMPULSORY
(can be released temporarily by using OFF COMPULSORY key)
WM-#30 PLU NOT FOUND: Enter correct PLU code or program PLU code.
WM-#31 CHECK-OUT BILL ISSUE IS COMPULSORY
Press CHECK-OUT BILL key. (can be canceled by using BILL CANCEL key)
WM-#32 SLIP PAPER HAS NOT BEEN INSERTED
WM-#33 CURRENT ITEM TRACK / CLERK INTERRUPT MEMORY IS FULL
Close the item track or the clerk's transaction temporarily by NEW BALANCE key or close it by a TOTAL
(media) key.
WM-#34 ENTIRE ITEM TRACK / CLERK INTERRUPT MEMORY IS FULL
- close the item track by NEW BALANCE key or the clerk's transaction temporarily by STORAGE key, then
- close another item track, or
- another clerk's transaction by a media key to secure additional item track / clerk interrupt memory, or
- do the previous balance key operation.
CHECKING THE NUMBER OF BLOCKS OF ITEM TRACK [SF-12.a=0] or
CLERK INTERRUPT MEMORY [SF-12.a=1]
This function is used for checking the number of remaining blocks.
-
Set the control key to X position.
-
Press ITEM TRACK # key.
-
The number of remaining blocks is displayed.
*** TRACK SORT ***
After the item track or the clerk's transaction has been closed by a media key, the occupied blocks will become free.
To secure the memory of currently occupied transactions, a new transaction can not be opened, even if a few blocks
remain.
The maximum number of item tracks or clerk interrupt memories, that can be handled, depends on the number of
items registered per item track or clerk interrupt memory.
# of blocks
- 384 blocks are available.
- One transaction always occupies one block.
- Up to 24 blocks (max. 359 items) are used for one transaction.
- 1st block can memorize 7 items, and 2nd ~ 24th blocks 16 items per block.
# of item tracks/clerk interrupt memories (max. 99 item tracks/32 clerk interrupt memories)
Up to 99 item tracks (max.) can be used if 39 items each is registered.
Up to 50 item tracks can be used if 103 items each is registered.
Up to 32 item tracks or clerk interrupt memories (max.) can be used if 183 items each is registered.
Up to 16 item tracks or clerk interrupt memories can be used if 359 items (max.) each is registered.
For example, in case of 50 tracks: 384 blocks / 50 tracks = 7 (7.68) blocks / track, 7 items + 6 blocks * 16 items = 103 items
WM-#35 NEW BALANCE CLOSING OF ITEM TRACK IS COMPULSORY
(can be released temporarily by using OFF COMPULSORY key)
WM-#36 NEW BALANCE CLOSING OF ITEM TRACK IS PROHIBITED
WM-#37 ITEM TRACK # INPUT IS COMPULSORY
WM-#38 TABLE # INPUT FOR CLERK INTERRUPT IS COMPULSORY
WM-#39 COOKING MESSAGE INPUT IS COMPULSORY
(WM-#36~39: can be released temporarily by using OFF COMPULSORY key)
WM-#40 ITEM TRACK TRANSFER IS PROHIBITED
WM-#41 ITEM TRACK # NOT FOUND
WM-#42 SLIP PRINT IS COMPULSORY: (can be released temporarily by using OFF COMPULSORY key)
WM-#43 CLERK ID ERROR
The clerk was not assigned to the track in registration. Enter correct clerk code or use the correct clerk key.
WM-#44 SUBTOTAL BILL ISSUE COMPULSORY: (can be released by using BILL CANCEL key)
WM-#45 ARE YOU SURE TO EXECUTE TRANSACTION VOID ?
356
number of remaining blocks (total 384 blocks)
116