Table of Contents
Advertisement
NTI UNIMUX MULTI-USER KVM SWITCH
SerTest- RS232 Interface Test Program
This software allows a user to test the functions of an NTI server switch, matrix switch or Multi-user/Multi-platform switch RS232
interface.
The program SERTEST along with the Matrix Switcher's Control Program (page 32) is installed from the CD packaged
with this switch. SERTEST generates a main menu with the selections described below:
Main Options
Matrix Operations
•
Ethernet Operations
•
Setup Options
•
About SerTest
•
Matrix Operations
Key
Selection
1)
Connect Output/User to an Input/CPU
2)
Connect All Outputs/Users to an Input/CPU
3)
Connect Audio Output/User to an Input/CPU
4)
Connect All Audio Outputs/Users to an Input
5)
Change Mute Status for Audio Output/User
6)
Change Volume for Audio Output/User
7)
Read Connection for Video Output/User
8)
Read Connection for Audio Output/User
9)
Read Mute and Volume for Audio Output/User
a)
Save I/O Connections into Unit Memory
b)
Restore I/O Connections from Unit Memory
c)
Change All Units Baud Rate (9600/COM1:)
d)
Reset Unit
e)
Reset All Units
f)
Read Unit Size
g)
Read Unit Version/Revision String
h)
Save All Units I/O Connections into Units Memory
i)
Restore All Units I/O Connections from Units
Memory
Selections in the "Key" column that are gray are not applicable to this product.
Setup Options
Key
Selection
1)
select Com port current:
(COM1:)
2)
select Baud rate current:
(9600)
3)
set unit Address current:
(1)
For any selection that requires user input, the user is prompted. When commands are sent to the matrix unit, the command string
and matrix unit responses are echoed to the screen. All commands generated by the program are formatted according to the
information provided in sections above. If any transmission problems are detected, an error message is displayed.
Press <Esc> or <Enter> to back out to the main menu and press again to exit.
- send commands to the matrix unit.
- set Ethernet connection variables (not applicable to this product)
- set COM port, baud rate, and unit address
- display the program version
Description
- connect an output to an input
- connect all outputs to an input
- connect an output to an input (audio ports only)
- connect all outputs to an input (audio ports only)
- mute or un-mute the Audio port output
- change Audio port output volume
-read the connection of a specific video output
-read the connection of a specific audio output
- read the volume and the mute status of the specified output (audio
ports only)
-save the connections into switch memory bank
-restore the connections from switch memory bank
-change RS-232 Baud rate of all switches
-the current baud rate and serial port are displayed in parentheses
- send a reset command to the switch
(This command does not function at this time)
- send an internal reset command to all switches
- read the switch size (number of inputs and outputs)
-read a string containing the switch version, type, and size
-save the connections into switch memory bank, command for all
switches
-restore the connections from switch memory bank, command for all
switches
Description
- select PC serial port
- the current PC serial port is displayed in parentheses
- select PC serial port baud rate
- the current baud rate is displayed in parentheses
- select the unit address
- the current address is displayed in parentheses
33
Advertisement
Table of Contents
