Auto Operation - Vivax ACP-12CH35AETI-B User Manual

Auto operation

SE T TEMPERAT URE ( C)
AUTO FAN
COOL HIGH
MED
DRY
HEAT LOW
ADJUST
3
ON/OFF
MODE
FAN SPEED
1
DI R ECTION
TIMER ON
/SWI N G S LE EP
CLEAN
TIMER OFF
AIR
RESETLO CK
SELF FOLLOW
LED
TURBO
ME
CL EAN DISPLAY
When you set the air conditioner in AUTO
mode, it will automatically select cooling,
heating (Cooling & Heating models only),
or health operation depending on what
temperature you have selected and the
room temperature.
2
Once you select the operating mode,
the operating conditions are saved in
the unit's microcomputer memory.
Thereafter, the air conditioner will start
operating under the same conditions
when you simply push the ON/OFF
button of the remote controller.
Start
Ensure the unit is plugged in and power
is available. The OPERATION indicator
on the display window of the indoor unit
illuminates.
1. Mode select button (MODE)
Press to select AUTO.
2. Temperature button (TEMP)
Set the desired temperature. Normally,
set it between 21 C and 28 C.
3. ON/OFF button
Press the ON/OFF button to start
the air conditioner.
Stop
ON/OFF button
Push this button again to stop the air
conditioner.
If the AUTO mode is uncomfortable,
you can select the desired conditions
manually.
When you select the AUTO mode, you
do not have to set the fan speed. The
fan speed will be automatically
controlled.
6
o o